*Prices in USD* Contact John: 1-888-403-9012 for Hydrobike parts, or john@hydrobikeparts.com to purchase parts with instructions via email.
| Console | Part | $US |
|---|---|---|
 |
2101 |
189 |
| Console for storage Hunter | 2102 |
189 |
| Console for storage Purple | 2103 |
189 |
| Deck | Part # | Cost |
 |
1341 |
189 |
| Poly Deck Hunter | 1342 |
189 |
| Poly Deck Purple | 1343 |
189 |
| Cross Tubes | Part # | Cost |
| Cross Tube Assembly Double Unit 92″ With End Caps (2 pcs) | 2360 |
249 |
| Cross Tube Assembly Single Unit 50″ With End Caps (2 pcs) | 2350 |
199 |
| Drivetrain Assembly | Part # | Cost |
 |
2205 | 829 |
| Tape, Drivetrain Top Wrap 12″ long x 2″ | 4 | |
Pinion Bevel Gear for Prop Shaft With Connecting Pin  |
1233 | 49 |
Lower Sprocket / Gear Assembly 7/16 Bore  |
2230 |
228 |
Drive Chain Internal 35 132 Pitches, Custom Fit Continuous Strand  |
1221 | 57 |
Upper Inner Sprocket 12 Teeth 1/2″ bore  |
1213 | 44 |
Bearing 1615 For Propeller Shaft .4375” Shaft Steel  |
1278 | 12 |
Bearing 1621 For Upper Axle .25″ Shaft Steel  |
1277 | 15 |
Prop Seals, Oil .625 ID x 1.375 OD, 3 Pieces With Seal Saver  |
2245 | 23 |
| Pin, Steel Dowel 7/16 x 2.0 | 8 | |
| Propeller Axle 1/2 Diameter Stainless | 1241 | 44 |
Upper Axle With Sprocket 5/8 Diameter  |
2235 | 69 |
 Friction lock with instructions |
2265 | 42 |
| Housing Drivetrain Large Section | 99 | |
| Housing Drivetrain Small Section | 89 | |
| Nylon Lock Nut For Drivetrain Housing | 1 | |
| 21 O-Rings Kit for Drivetrain Housing | 6 | |
| Grooved Pin, Prop Shaft Connect to Gear | 3 | |
Propeller Kit With Fastening Bolt And Nut  |
2240 | 49 |
| Propeller Pin, Pan Head 1.5 | 2 | |
| Nylon Lock Nut for Propeller Pin | 1 | |
| Pan Head Phillips Screw 10-32 5/8 | 1 | |
| Pan Head Phillips Screw 10-32 | 1 | |
| Drain Plug 1/4 x 1/2; Binding Head | 3 | |
| Screw SMS Truss #8 x .75 SS 304 | 1 | |
| Shim .5 ID x .75 OD x .010 Thick | 2 | |
| Shim .5 ID x .75 OD x .025 Thick | 2 | |
| Shim .75 ID x 1.125 OD x .010 Thick | 2 | |
| Drivetrain Housing Sealant | 2192 | 32 |
 Lever Arm Assembly |
2270 |
129 |
| O-ring Drainplug Drivetrain | 1002165 | 1 |
| Shim .020 x .75 x 1.125 OD | 1002166 | 2 |
| Strut Bumper w/angle 65D | 1002176 | 24 |
| Floats | Part # | Cost |
 Yellow or hunter, with straps |
2030 |
399 |
| Pontoon Tape 1″ Black 36 yd roll | 1781 | 35 |
Frame / Float Knobs  |
1761 | 4 |
| Pontoon Carry Straps, Old Style With Bolts (1 fasten down point) | 2335 | 14 |
 Pontoon Carry Straps, New Style With Bolts (2 fasten down points) |
2330 | 14 |
| Poly Plug Pontoon Square Head | 1336 | 4 |
| Hydrobike Frame Assembly | Part # | Cost |
| Frame Assembly | 2410 |
999 |
Frame Bolt & Rubber Washer  |
2190 | 4 |
| Chain Tensioner Roller | 9 | |
Seat Cruiser Style, 10″ Width  |
1431 | 37 |
Seat Post 1.0″ diameter Aluminum  |
1432 | 29 |
Seat Post Clamp 1.125 Diam Alloy  |
2430 | 18 |
| Handle Bar 2-4 rise 22-25″ Length | 1435 | 29 |
Crank Arm with bolts175mm x 10mm  |
2455 | 79 |
Bottom Bracket Curve 68/122.5  |
1411 | 44 |
Pedal Set, Includes 2″ Wide Straps  |
1438 | 38 |
Rustbuster Chain 112 Link .5 x .125 With Extra Half Link  |
1456 | 30 |
| Nut Nyloc 10-32 Thin | 1 | |
Front Rudder Assembly  |
2440 |
279 |
Rudder Spring Clip, Double Button  |
1445 | 9 |
| Rudder Collar, 1″ Bore Aluminum | 1442 | 11 |
Steering Bushing, Nylon  |
1412 | 12 |
| Screw Pan Phillips 10-24 x 1.625 18-8 | 1002186 | 1 |
| Frame Sub Assembly | Part # | Cost |
| Spacer .171″ ID x .5″ OD x 7/8 Nylon | 2 | |
| Spacer .194″ ID x .5″ OD x 3/4 Nylon | 2 | |
| Spacer .18 ID x .26 OD x 9/16 Nylon | 2 | |
| Spacer .248 ID x .38 OD x 9/16 Nylon | 3 | |
| Screw Pan Phillips SMS #14 x 1.25 | 1 | |
Chain Guard Assembly  |
2480 | 98 |
| Decal Kit with Hydrobike Logo | 2420 | 18 |
| Spare Parts Kit: 4 Frame Knobs / Bolts / Washers, Prop Seal Kit | 49 | |
 Custom Fit Fishing Rod Holder & Mount |
32 | |
Hydrobike Cover  |
269 |